44 mm badge template and button badge size
A 44 mm badge template is the button badge template for a circular pin-back badge pressed on a 44 mm mould. Abhishek Design Studio draws that circle in the browser. The Corel download stays on the shop.
The die cut is 54 mm. The bleed is 5 mm on each side, from the 44 mm face out to the die cut. The safe margin is 2 mm inside the face, so names and faces stay inside the 40 mm safe zone.
| Line | Size | What it does |
|---|---|---|
| Die cut | 54 mm | The machine cuts the paper on this line. |
| Finished face | 44 mm | What a person sees after the piece is pressed. |
| Bleed | 5 mm on each side | Background runs from the finished face out to the die cut. If it stops short, the edge prints white. |
| Safe margin | 2 mm inside the face | Names and faces stay inside the 40 mm safe zone. |
Bad example. The name is cut off because it crosses the 40 mm safe zone. The colour stops at the finished face, so the bleed prints white.
Good example. The name is kept inside the 40 mm safe zone. The colour runs across the bleed to the 54 mm die cut.
- Product: 44 mm button badge
- Also called: 44 mm badge template and 44 mm badge size
- Export: PNG, or A4 PDF at 100% scale
- Template file: 44×44 mm Corel file on the shop
- Material: 44 mm button badge material on the shop
How to design a 44 mm badge
- Open Design Studio and choose the 44 mm circle.
- Keep the name inside the safe zone. A 44 mm circle has less room than 58 mm.
- Extend the background to the bleed.
- Export an A4 PDF and print at 100% scale.
- Press with a 44 mm mould and the matching material.
44 mm die cut, bleed, and safe margin
| Line | Size | What goes there |
|---|---|---|
| Die cut | 54 mm | The machine cuts the paper on this line. |
| Finished face | 44 mm | What a person sees after the piece is pressed. |
| Bleed | 5 mm on each side | Background runs from the finished face out to the die cut. If it stops short, the edge prints white. |
| Safe margin | 2 mm inside the face | A short name and a small mark. Names and faces stay inside the 40 mm safe zone. |
Common print problems
- The type is cut off. Shorten the name or move it inside the safe zone.
- The print does not match the die. Print at 100% scale.
- You need the Corel file. Use the 44×44 mm badge template file link on this page.
Questions
What is a 44 mm badge template?
A 44 mm badge template is the cut layout for a 44 mm circular pin-back badge. The shop file is the Corel download. This page is the browser layout.
Which material matches a 44 mm badge?
Use 44 mm button badge material from the shop, and press it in a 44 mm mould.
Use 58 mm when the badge needs a name and a photo. Use 32 mm for a smaller pin.
Download the 44×44 mm Corel template · 44×44 mm badge template file · 44 mm button badge material · button badge machines and materials · Design a 44 mm badge · 58 mm button badge · 32 mm badge template · 75 mm button badge · Button badge size chart · How to make button badges