2 × 6 inch polaroid size
A 2 × 6 inch polaroid is a tall bookmark sheet. The die cut is 50.8 × 152.4 mm. The finished face is 44.8 × 148.4 mm, and the safe zone is 42.8 × 146.4 mm.
The die cut is 50.8 × 152.4 mm. The bleed is 3 mm on the left and right and 2 mm on the top and bottom, from the 44.8 × 148.4 mm face out to the die cut. The safe margin is 1 mm inside the face, so names and faces stay inside the 42.8 × 146.4 mm safe zone.
| Line | Size | What it does |
|---|---|---|
| Die cut | 50.8 × 152.4 mm | The machine cuts the paper on this line. |
| Finished face | 44.8 × 148.4 mm | What a person sees after the piece is pressed. |
| Bleed | 3 mm left and right, 2 mm top and bottom | Background runs from the finished face out to the die cut. If it stops short, the edge prints white. |
| Safe margin | 1 mm inside the face | Names and faces stay inside the 42.8 × 146.4 mm safe zone. |
Bad example. The name is cut off because it crosses the 42.8 × 146.4 mm safe zone. The colour stops at the finished face, so the bleed prints white.
Good example. The name is kept inside the 42.8 × 146.4 mm safe zone. The colour runs across the bleed to the 50.8 × 152.4 mm die cut.
- Format: 2 × 6 inch
- Die cut: 50.8 × 152.4 mm
- Finished face: 44.8 × 148.4 mm
- Safe zone: 42.8 × 146.4 mm
- Studio: Abhishek Design Studio, free in the browser after a free account
What fits
A tall photo. Type stays in the inner strip.
How to design a 2 × 6 inch
- Open Design Studio on this size.
- Place the name or the photo inside the safe zone. A tall photo. Type stays in the inner strip.
- Extend the background to the die cut so the edge is not white.
- Export a PDF at 100% scale. Do not choose Fit to page.
2 × 6 inch die cut, bleed, and safe margin
| Line | Size | What goes there |
|---|---|---|
| Die cut | 50.8 × 152.4 mm | The machine cuts the paper on this line. |
| Finished face | 44.8 × 148.4 mm | What a person sees after the piece is pressed. |
| Bleed | 3 mm left and right, 2 mm top and bottom | Background runs from the finished face out to the die cut. If it stops short, the edge prints white. |
| Safe margin | 1 mm inside the face | A tall photo. Type stays in the inner strip. Names and faces stay inside the 42.8 × 146.4 mm safe zone. |
Common print problems
- The name is cut off. Move it inside the safe zone and export again.
- A white edge shows. Extend the background to the die cut.
- The print is the wrong size. Choose actual size, 100% scale.
Questions
What is a 2 × 6 inch?
A 2 × 6 inch polaroid is a tall bookmark sheet. The die cut is 50.8 × 152.4 mm. The finished face is 44.8 × 148.4 mm, and the safe zone is 42.8 × 146.4 mm.
What should I put on a 2 × 6 inch?
A tall photo. Type stays in the inner strip. Names and faces stay inside the safe zone.
The 6 × 9 cm polaroid is shorter and wider.
button badge machines and materials · 6 × 9 cm polaroid · 80 mm round polaroid · 71 mm square polaroid · 3 × 4 inch polaroid · 4 × 6 inch polaroid · Design a 2 × 6 inch · Button badge size chart