71 mm square polaroid size

A 71 mm square polaroid is a square photo. The named sheet is 71 mm. The finished face is 67 mm, and the safe zone is 65 mm.

The die cut is 71 × 71 mm. The bleed is 2 mm on each side, from the 67 × 67 mm face out to the die cut. The safe margin is 1 mm inside the face, so names and faces stay inside the 65 × 65 mm safe zone.

Outer line: die cut, 71 × 71 mm. Blue line: finished face, 67 × 67 mm. Grey line: safe zone, 65 × 65 mm.

Line	Size	What it does
Die cut	71 × 71 mm	The machine cuts the paper on this line.
Finished face	67 × 67 mm	What a person sees after the piece is pressed.
Bleed	2 mm on each side	Background runs from the finished face out to the die cut. If it stops short, the edge prints white.
Safe margin	1 mm inside the face	Names and faces stay inside the 65 × 65 mm safe zone.

Bad example

Bad example. The name is cut off because it crosses the 65 × 65 mm safe zone. The colour stops at the finished face, so the bleed prints white.

Good example

Good example. The name is kept inside the 65 × 65 mm safe zone. The colour runs across the bleed to the 71 × 71 mm die cut.

Format: 71 mm square
Die cut: 71 × 71 mm
Finished face: 67 × 67 mm
Safe zone: 65 × 65 mm
Studio: Abhishek Design Studio, free in the browser after a free account

What fits

A square photo, inset from the paper edge.

How to design a 71 mm square

Open Design Studio on this size.
Place the name or the photo inside the safe zone. A square photo, inset from the paper edge.
Extend the background to the die cut so the edge is not white.
Export a PDF at 100% scale. Do not choose Fit to page.

71 mm square die cut, bleed, and safe margin

Line	Size	What goes there
Die cut	71 × 71 mm	The machine cuts the paper on this line.
Finished face	67 × 67 mm	What a person sees after the piece is pressed.
Bleed	2 mm on each side	Background runs from the finished face out to the die cut. If it stops short, the edge prints white.
Safe margin	1 mm inside the face	A square photo, inset from the paper edge. Names and faces stay inside the 65 × 65 mm safe zone.

Common print problems

The name is cut off. Move it inside the safe zone and export again.
A white edge shows. Extend the background to the die cut.
The print is the wrong size. Choose actual size, 100% scale.

Questions

What is a 71 mm square?

A 71 mm square polaroid is a square photo. The named sheet is 71 mm. The finished face is 67 mm, and the safe zone is 65 mm.

What should I put on a 71 mm square?

A square photo, inset from the paper edge. Names and faces stay inside the safe zone.

The 80 mm round polaroid is the circular photo.

button badge machines and materials · 6 × 9 cm polaroid · 80 mm round polaroid · 2 × 6 inch polaroid · 3 × 4 inch polaroid · 4 × 6 inch polaroid · Design a 71 mm square · Button badge size chart