22 × 71 mm sticker badge

A 22 × 71 mm sticker badge is a name strip. The finished face is 71 × 22 mm, the die cut is 71 × 22 mm, and the safe zone is 69 × 20 mm. It is not a pin-back circle.

The die cut is 71 × 22 mm. There is no wrap bleed, because the die cut and the finished face are both 71 × 22 mm. The safe margin is 1 mm inside the face, so names and faces stay inside the 69 × 20 mm safe zone.

Outer line: die cut, 71 × 22 mm. Blue line: finished face, 71 × 22 mm. Grey line: safe zone, 69 × 20 mm.

Line	Size	What it does
Die cut	71 × 22 mm	The machine cuts the paper on this line.
Finished face	71 × 22 mm	What a person sees after the piece is pressed.
Bleed	None	The cut and the face are the same size. There is nothing to wrap.
Safe margin	1 mm inside the face	Names and faces stay inside the 69 × 20 mm safe zone.

Bad example

Bad example. The name is cut off because it crosses the 69 × 20 mm safe zone.

Good example

Good example. The name is kept inside the 69 × 20 mm safe zone.

Format: 22 × 71 mm
Die cut: 71 × 22 mm
Finished face: 71 × 22 mm
Safe zone: 69 × 20 mm
Studio: Abhishek Design Studio, free in the browser after a free account

What fits

One name on a single line.

How to design a 22 × 71 mm

Open Design Studio on this size.
Place the name or the photo inside the safe zone. One name on a single line.
Extend the background to the die cut so the edge is not white.
Export a PDF at 100% scale. Do not choose Fit to page.

22 × 71 mm die cut, bleed, and safe margin

Line	Size	What goes there
Die cut	71 × 22 mm	The machine cuts the paper on this line.
Finished face	71 × 22 mm	What a person sees after the piece is pressed.
Bleed	None	The cut and the face are the same size. There is nothing to wrap.
Safe margin	1 mm inside the face	One name on a single line. Names and faces stay inside the 69 × 20 mm safe zone.

Common print problems

The name is cut off. Move it inside the safe zone and export again.
A white edge shows. Extend the background to the die cut.
The print is the wrong size. Choose actual size, 100% scale.

Questions

What is a 22 × 71 mm?

A 22 × 71 mm sticker badge is a name strip. The finished face is 71 × 22 mm, the die cut is 71 × 22 mm, and the safe zone is 69 × 20 mm. It is not a pin-back circle.

What should I put on a 22 × 71 mm?

One name on a single line. Names and faces stay inside the safe zone.

The 84 × 29 mm sticker is the longer name strip.

22×71 mm badge stickers · button badge machines and materials · 35 mm round sticker · 84 × 29 mm sticker badge · Design a 22 × 71 mm · Button badge size chart