35 × 35 mm keychain template

A 35 × 35 mm keychain template matches a 35 mm round sticker. The finished face is 35 mm, the die cut is 35 mm, and the safe zone is 33 mm.

The die cut is 35 mm. There is no wrap bleed, because the die cut and the finished face are both 35 mm. The safe margin is 1 mm inside the face, so names and faces stay inside the 33 mm safe zone.

Outer line: die cut, 35 mm. Blue line: finished face, 35 mm. Grey line: safe zone, 33 mm.

Line	Size	What it does
Die cut	35 mm	The machine cuts the paper on this line.
Finished face	35 mm	What a person sees after the piece is pressed.
Bleed	None	The cut and the face are the same size. There is nothing to wrap.
Safe margin	1 mm inside the face	Names and faces stay inside the 33 mm safe zone.

Bad example

Bad example. The name is cut off because it crosses the 33 mm safe zone.

Good example

Good example. The name is kept inside the 33 mm safe zone.

Format: 35 mm round
Die cut: 35 mm
Finished face: 35 mm
Safe zone: 33 mm
Studio: Abhishek Design Studio, free in the browser after a free account

What fits

A short name or a logo.

How to design a 35 mm round

Open Design Studio on this size.
Place the name or the photo inside the safe zone. A short name or a logo.
Extend the background to the die cut so the edge is not white.
Export a PDF at 100% scale. Do not choose Fit to page.

35 mm round die cut, bleed, and safe margin

Line	Size	What goes there
Die cut	35 mm	The machine cuts the paper on this line.
Finished face	35 mm	What a person sees after the piece is pressed.
Bleed	None	The cut and the face are the same size. There is nothing to wrap.
Safe margin	1 mm inside the face	A short name or a logo. Names and faces stay inside the 33 mm safe zone.

Common print problems

The name is cut off. Move it inside the safe zone and export again.
A white edge shows. Extend the background to the die cut.
The print is the wrong size. Choose actual size, 100% scale.

Questions

What is a 35 mm round?

A 35 × 35 mm keychain template matches a 35 mm round sticker. The finished face is 35 mm, the die cut is 35 mm, and the safe zone is 33 mm.

What should I put on a 35 mm round?

A short name or a logo. Names and faces stay inside the safe zone.

The 27 × 40.5 mm keychain template is the tall insert.

35×35 mm keychain template · button badge machines and materials · 22 × 71 mm sticker badge · 84 × 29 mm sticker badge · 55 × 25 mm keychain · 27 × 40.5 mm keychain · Fridge magnets and keychains · Design a 35 mm round · Button badge size chart