84 × 29 mm sticker badge

An 84 × 29 mm sticker badge is a long name strip. The finished face is 84 × 29 mm, the die cut is 84 × 29 mm, and the safe zone is 82 × 27 mm.

The die cut is 84 × 29 mm. There is no wrap bleed, because the die cut and the finished face are both 84 × 29 mm. The safe margin is 1 mm inside the face, so names and faces stay inside the 82 × 27 mm safe zone.

Outer line: die cut, 84 × 29 mm. Blue line: finished face, 84 × 29 mm. Grey line: safe zone, 82 × 27 mm.

Line	Size	What it does
Die cut	84 × 29 mm	The machine cuts the paper on this line.
Finished face	84 × 29 mm	What a person sees after the piece is pressed.
Bleed	None	The cut and the face are the same size. There is nothing to wrap.
Safe margin	1 mm inside the face	Names and faces stay inside the 82 × 27 mm safe zone.

Bad example

Bad example. The name is cut off because it crosses the 82 × 27 mm safe zone.

Good example

Good example. The name is kept inside the 82 × 27 mm safe zone.

Format: 84 × 29 mm
Die cut: 84 × 29 mm
Finished face: 84 × 29 mm
Safe zone: 82 × 27 mm
Studio: Abhishek Design Studio, free in the browser after a free account

What fits

A name and a short title.

How to design a 84 × 29 mm

Open Design Studio on this size.
Place the name or the photo inside the safe zone. A name and a short title.
Extend the background to the die cut so the edge is not white.
Export a PDF at 100% scale. Do not choose Fit to page.

84 × 29 mm die cut, bleed, and safe margin

Line	Size	What goes there
Die cut	84 × 29 mm	The machine cuts the paper on this line.
Finished face	84 × 29 mm	What a person sees after the piece is pressed.
Bleed	None	The cut and the face are the same size. There is nothing to wrap.
Safe margin	1 mm inside the face	A name and a short title. Names and faces stay inside the 82 × 27 mm safe zone.

Common print problems

The name is cut off. Move it inside the safe zone and export again.
A white edge shows. Extend the background to the die cut.
The print is the wrong size. Choose actual size, 100% scale.

Questions

What is a 84 × 29 mm?

An 84 × 29 mm sticker badge is a long name strip. The finished face is 84 × 29 mm, the die cut is 84 × 29 mm, and the safe zone is 82 × 27 mm.

What should I put on a 84 × 29 mm?

A name and a short title. Names and faces stay inside the safe zone.

The 22 × 71 mm sticker is the shorter name strip.

button badge machines and materials · 35 mm round sticker · 22 × 71 mm sticker badge · Design a 84 × 29 mm · Button badge size chart